fbpx

Thunder Laser Odin 32

[Precision & Speed Laser Engraver]

From $14800

Odin 32

In 2020, Thunderlaser introduced the Odin series laser engraver, a compact and cost-effective solution for high-quality engraving and cutting. With 5G acceleration, an 80 IPS (2000mm/sec) engraving speed, and an air-cooled RF tube, it offers a super-fast laser engraving solution. The minimal gantry payload ensures smooth operation, eliminating the need for a water chiller.

Odin 32

In 2020, Thunderlaser introduced the Odin series laser engraver, a compact and cost-effective solution for high-quality engraving and cutting. With 5G acceleration, an 80 IPS (2000mm/sec) engraving speed, and an air-cooled RF tube, it offers a super-fast laser engraving solution. The minimal gantry payload ensures smooth operation, eliminating the need for a water chiller.

Standard Features

Our Standard Features

High Speed Motor

High speed motors

Japanese ORIENTAL motor systems on X and Y axes, with 80 IPS(2000mm/s) and 3G acceleration engraving speed.

New: 100% smoother guide Rail

Patent guide rail developed by Thunder Laser,less resistance and low noise.
New: 1,000 DPI RF metal laser source

New: 1,000 DPI RF metal laser source

With excellent quality Beam output and stable laser power, lifespan up to 10,000 hours.
New: Upper & Lower Vent

New: Upper & Lower Vent

To timely remove the heat from material surface.
Dual Air Assist system

Dual Air-Assist system

Adjusting air volume for cutting and engraving separately for different requirements

NewEightfold-Open-flap-protection

Laser will stop if someone open any machine cover during working.
Technical Specifications
Laser System Odin 22 Odin 32
Laser Tube Wattage 30 Watt 55 Watt (Coherent)
Working Area 559 x 381 mm (22″ x 15″) 813 x 508 mm (32″ x 20″)
Table Size 625 x 440 mm (24.6″ x 17.3″) 899 x 567 mm (35.4″ x 22.3″)
Max Part Size(W x L x H) 625 x 440 x 190mm(24.6″ x 17.3″ x 7.5″) 879 x 567 x 190mm(34.6″ x 22.3″ x 7.5″)
Dimensions(W x D x H) 1030 x 860 x 1090mm (40″ x 34″ x 43″) 1284 x 987 x 1090mm (51″ x 39″ x 43″)
Laser Type Radio Frequency Laser Tube
Cooling Air Cooled
Maximum Speed 2000MM/S
Maximum machining size at 1000 speed – lightweight laser head 529 x 381 mm(20.8″ x 15″) 783 x 508 mm(30.8″ x 20″)
Maximum machining size at 2000 speed – lightweight laser head 461 x 381 mm(18″ x 15″) 715 x 508 mm(28″ x 20″)
Speed and Power Control Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes Optimized raster,vector,and combined mode
Resolution(DPI) User controlled from 100 to 1000DPI(standard laser head)
Computer Interface Ethernet and USB Connection
Compatible Operating Systems Windows, Mac, and Linux (Mac and Linux with LightBurn Software)
Buffer Memory 128MB Standard
Display Panel 3.5″ LCD panel showing current file, total working time, laser power, speed, etc…
Electrical Requirements Requirements110 to 240 volts,50 or 60 Hz,single phase
Z-Axis Height 185mm (7.3″) 185mm (7.3″)
Net Weight 145kgs (320lbs) 167kgs (368lbs)
Motion Control System High-Speed Stepper Motors
Speed and Power Control(engraving depth)

Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.

Ventilation System Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Workpiece table Solid metal blades & Honeycomb table
Max. table load 20kgs (44lbs)
Materials
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
Materials Engrave Cut
Wood
Acrylic
Delrin
Cloth
Leather
Mat Board
Melamine
Paper
Mylar
Pressboard
Rubber
Wood Veneer
Fiberglass
Plastic
Cork
Corian
Twill
Anodized Aluminum X
Painted Metals X
Tile X
Glass X
Coated Metals X
Ceramics X
Marble X
Stainless Steel * X
Brass * X
Titanium * X
Bare Metal * X
Machine Size
odin22 size odin32 size
Optional Items

Optional Items

Rotary for Bolt and Plus

Provides precise processing on cylindrical objects for Bolt and Plus, enhancing your laser processing capabilities.

Rotary for Bolt Pro

It enables precise processing on cylindrical objects for Bolt Pro, ensuring accurate processing of bottles, glasses, and more..

Focus lenses

Focus Lenses

Lenses available for all project types. The more detailed the graphics, the shorter the focal length. The thicker the material, the greater the focal length is required.

Lightburn DSP License Key

Install a removable rotary in your laser engraving machine for cylindrical glass, wood, or metal products.

Thunder Laser Odin Series

The Odin series laser engraver and cutting machine combines a compact size, with high-quality engraving and cutting at a low cost. This Laser machine is intended for very high-detail engraved and minimal cutting.

Application

Our engraving and cutting machines empower you to push the boundaries of endless possibilities.

What Our Customers Say About?

Lisa Turnbull

5/5

Transformative! After a failed attempt with a ‘hobby’ laser a year ago, our Thunderlaser engraver turns the tide. Tonight, success with precision crafting, redefining our journey

Rob Nance

Rob Nance

5/5

Consulted with Glenn at Thunder Laser about my project goals, and he provided valuable assistance. Settled on the Odin32 laser engraver and couldn’t be happier. Thanks to Glenn and the entire Thunder Laser team!

Jason Dow

5/5

Outstanding components, meticulous assembly, exceptional people. Thunder Laser offers unparalleled value for a laser engraver! Highly recommended.

Belinda Fancett

5/5

Mandy was extremely helpful in answering all of my questions promptly as I was researching what Laser to purchase as my very first laser engraver.

Kelsie Donant ico

Kelsie Donant

5/5

Undecided about my laser purchase, Glenn’s guidance was invaluable. With exceptional patience, he addressed my questions, providing unwavering support for choosing a laser engraver.

Tommy Norris

5/5

Undecided about my laser purchase, Glenn’s guidance was invaluable. With exceptional patience, he addressed my questions, providing unwavering support for choosing the right laser engraver.

Frequently Asked Questions

1.Do I have to record all the cutting/engraving parameters for different materials in a paper?

No need. We’ve added a parameter library in the software, once you find out what settings is best for a certain material;you can record it in the parameter library. Next time you cut the same material, you just need to read it from the list.

2.What kind of software and hardware do I need to use Thunder Laser?

You can use your Thunder Laser machine from your Mac, PC, and more to connect with it. You’ll just need a USB-PC Cable or Ethernet Cable.

 

Utilizing software like LightBurn, RDworks, and Adobe Illustrator, you have the capacity to create designs. Thunder Bolt has the capability to print various file formats including JPG, PNG, SVG, PDF, and more. The process of printing a file is as simple as transmitting it to our Laser Machine, followed by fine-tuning the preview according to your preferences.

3.What files is the software compatible with?
JPG, PNG, BMP, PLT, DST, SVG,DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW
 
4.Can I take a picture and engrave the image on an object without any hassles?
Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.
 
5.Does machine comes ready to work?
the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube) https://www.thunderlaser.com.au/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html https://www.thunderlaser.com.au/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html
 
6.How much time do I need to spend on learning how to run the laser machine?
As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too. https://www.thunderlaser.com.au/video/what-laser-cutter-can-create.html https://www.thunderlaser.com.au/video/how-to-use-your-laser-machine.html https://www.thunderlaser.com.au/video/how-to-use-your-laser-software.html
 
7.How to send a job to the machine?
Please watch this video directly to learn the detail https://www.thunderlaser.com.au/video/how-to-use-your-laser-software.html
 
8.Do I need separate laser systems for engraving and cutting?
No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
9.What is the warranty on Thunder Laser machines?
Our Laser machines come with a 2-year warranty for parts and a 1-year warranty for consumables. This warranty is backed by the Thuner Laser Australia.

Touch base with Thunder Laser AUSTRALIA

    Full Name

    Emall Address

    Phone Number

    Message

    small_c_popup.png

    contact us

      Full Name

      Emall Address

      Phone Number

      Message